2013 Land Pride RCF3660

<< Back to 2013 Land Pride Rotary Cutters

2013 Land Pride RCF3660

The Land Pride RCF36 Series Rotary Cutter is a brute, featuring a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter. The RCF36 has a smooth top design and offers a 2" to 12" cutting height range. These units come equipped standard with a 3/16" thick x 30-7/16" diameter heavy-duty stump jumper and replaceable bolt-on skid shoes. Safety guards for the front include rubber deflector, single chain guard or double chain guard options; rear options include either single- or double-chain guards.

Pricing/Color Information




Surpassed ruggedindustry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.

5 Year gearbox warranty Shows our confidence in the gearbox integrity.

190 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.

Cat. 5 driveline with4-plate slip-clutch Slip-clutch driveline offers convenience for continual work

Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design

Heavy deck construction with 3/16” deck top & 1/4” side skits Strong heavy deck material for rugged use.

Box tubing deck supports Makes for a stronger rigid deck.

Fully welded deck Adds additional strength.

Round back design Helps discharge grass better than enclosed or partially enclosed cutters.

13 3/8” Deck Height Allows cutter to handle heavy cutting conditions.

2” to 12” Cutting height Provides for a wide range of cutting conditions.

High cutting capacity Can cut brushy areas with saplings up to 4”.

Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.

1/2” x 4” Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.

Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.

3/16” Plate stump jumper Standard round stump jumper slides over stumps, rocks and debris.

High blade tip speed ensures clean cut.

15” Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.

1 1/2” Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.

Dual position clevis type 3-point floating top link Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links

2013 Land Pride RCF3660



(Recommended Tractor PTO HP) 50-190 HP
ASAE Category 5 with 4-plate Slip Clutch
(Driveline Protection) Center Bolt 4 plate Slip Clutch


Cutting Capacity
4” Diameter
Deck Material - 3/16”
Side Skirt 1/4”
Deck Height
(Bottom of Deck to Bottom of Skid Shoe) 13 3/8”
Overall Width
66 1/2"
Overall Length
112 1/2”
1233 lbs. With front and rear single chain guards

General Information

Gear Box
1:1.6 Speed-Up Beveled Gears, Cast Iron Housing, 1 3/4”-20 spline input shaft and 2 3/8” output shaft
Gear Box
Lubricant - EP 80-90W oil
Gear Box
Oil Capacity - 10 pints
Skid Shoe
Construction-Replacable bolt on skid shoes
Stump Jumper Round Pan 3/16” x 30 7/16” with Blade Holder Bar
(2) 1/2” x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction
(Bolts) Keyed with harden flat washers & lock nuts.
(Tip Speed) 13,572 fpm
Cutting Height
2” - 12”
Deck Construction
All welded deck
Overall Unit and Driveline: One year Parts and Labor/Gearbox: Five years Parts and Labor/Blades, tires and driveline friction discs: Considered wear items (see complete Warranty Statement).
Category l or II with Floating Clevis Top Link, Quick Hitch Adaptable
(Tailwheel) 4” x 8” x 15” Laminated Tire with cast iron hub
Tailwheel Mount Assembly-Welded A-arm and Caster Fork with 360 degree swivel
Cutting Width

Power Take-Off (PTO)

PTO Speed
540 RPM


Request a quote for: 2013 Land Pride RCF3660

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.